Moldmaster Cat Blue Thixo

October 9, 2012

Moldmaster Cat Blue Thixo is a thixotropic catalyst for either QM 2125, QM 2128, QM 2223 or QM 2225.  It is a two-component, room temperature, condensation cure catalyst.  The cured rubber has excellent mechanical properties and good shelf-life stability.

 

KEY FEATURES

  • Thixotropic
  • Quick, tack-free time
  • Fast demold time
  • Minimal impact on cured physical properties

 

MAIN APPLICATIONS

  • Molds for polyester, polyurethane and epoxy resin castings
  • Molds for large and small statues
  • Molds for technical articles and prototypes
  • Molds for furniture and picture frame replication
  • Molds for GFRC pre-cast

 

QM Cat Clear SP

October 9, 2012

QM Cat Clear SP is a fast curing, two-component, room temperature, condensation cure catalyst for QM 130T.  Thixotropic and styrene resistant specialty catalysts are also available.

 

KEY FEATURES

  • Excellent physical properties and dimensional stability
  • Fast demold time

 

MAIN APPLICATIONS

  • Vacuum bags
  • Molds for technical articles and prototypes
  • Spray applications

 

QM Cat Red 3

October 9, 2012

QM Cat Red 3 is the fast curing version of the standard catalyst for the QM 100 series of products.  This is a two-component, room temperature, condensation cure system. Thixotropic and styrene resistant catalysts are also available.

 

KEY FEATURES

  • Quick tack-free time
  • Fast demold time
  • Minimal impact on cured physical properties

 

MAIN APPLICATIONS

  • Molds for polyester and polyurethane resin castings
  • Molds where hand mixing is required
  • Glove molding applications

 

Thixo Agent AC

February 10, 2012

 

PRODUCT DESCRIPTION

Thixo Agent AC is an additive for Quantum Silicones’ addition cure silicone elastomers that are silica filled. When used at 0.5% level this additive creates excellent thixotropic properties. Thixo Agent AC when used with silica filled platinum cured silicone elastomers will cause the material to exhibit non-slump behavior at a thickness of ~ 0.5” with fast cure and without changing the cured properties of the addition cure material. The cured rubber has outstanding mechanical properties and good shelf-life stability.

 

KEY FEATURES

  • Non-slump to ~ 0.5”
  • Does not affect cure times
  • Can vary thixotrophy as needed

 

MAIN APPLICATIONS

  • Spray applications
  • Glob-top
  • Glove molding
  • Lay-up molding