Moldmaster Cat Green

October 9, 2012

Moldmaster Cat Green is a two-component, room temperature, condensation cure catalyst for either QM 2125, QM 2128 or QM 2225.  The cured rubber has excellent mechanical properties and good shelf-life stability.  There are a variety of catalysts which allow for a variable cure speed offered with the Moldmaster base series.  Styrene resistant catalysts are also available.

 

KEY FEATURES

  • Quick, tack-free time
  • Fast demold time
  • Minimal impact on cured physical properties

 

MAIN APPLICATIONS

  • Molds for polyester, polyurethane and epoxy resin castings
  • Molds for large and small statues
  • Molds for technical articles and prototypes
  • Molds for furniture and picture frame replication
  • Molds for GFRC pre-cast

 

Moldmaster Cat Red

October 9, 2012

Moldmaster Cat Red is a two-component, room temperature, fast, condensation cure catalyst for either QM 2125, QM 2128 or QM 2225.  The cured rubber has excellent mechanical properties and good shelf-life stability.  There are a variety of catalysts which allow for a variable cure speed offered with the Moldmaster base series.  Styrene resistant catalysts are also available.

KEY FEATURES

  • Quick, tack-free time
  • Fast demold time
  • Minimal impact on cured physical properties

 

MAIN APPLICATIONS

  • Molds for polyester, polyurethane and epoxy resin castings
  • Molds for large and small statues
  • Molds for technical articles and prototypes
  • Molds for furniture and picture frame replication
  • Molds for GFRC pre-cast

 

QSil Deep Section Cat

February 10, 2012

 

PRODUCT DESCRIPTION

QSil Deep Section Catalyst can be used with two-component, room temperature condensation cure silicone materials.

 

KEY FEATURES

  • High durometer
  • Fast cure
  • Excellent dimensional stability
  • Deep section cure

 

MAIN APPLICATIONS

  • Potting and encapsulation of electronic components

 

QSil DBT

February 10, 2012

 

PRODUCT DESCRIPTION

QSiL DBT can be used with condensation cure materials to increase the cure speed.

 

KEY FEATURES

  • Variable cure speed
  • Fast cure

 

QSil STO

February 10, 2012

 

PRODUCT DESCRIPTION

QSil STO can be used with two-component, room temperature, condensation cure silicone materials to reduce the demold time. By adding two to three drops per hundred to the silicone base, it will reduce the demold time by roughly one half and also significantly reduce the working time.

 

KEY FEATURES

  • Very fast co-catalyst
  • Reduces demold time
  • Variable cure times based on amount used