Specialty Product Enhancers

Whether you need a faster cure, bond to a certain substrate or make it thixotropic, these are the fluids, primers and catalysts to achieve the results you require.

LEARN MORE

Applications

*Typical Properties

Product Name Description Datasheet
QM Diluent 100 A 100 cps viscosity polydimethlysiloxane fluid to lower viscosity and durometer.
QM Diluent 1000 A 1000 cps viscosity polydimethlysiloxane fluid to lower viscosity and durometer.
QM Diluent 50 A 50 cps viscosity polydimethlysiloxane fluid to lower viscosity and durometer.
QM Pt Accelerator Decreases demold time and improves inhibition resistance
with platinum cure products.
QM Thixo Agent An additive for condensation cure moldmaking silicones to create a non-slumping behavior once the material is catalyzed.
QSil DBT For use with condensation cure silicones to increase the cure speed.
QSil Deep Section Cat Convenient 10:1 ratio for use with QSil 40, QSil 58, QSil 60, QSil 940, and QSil 960 from QSi's Potting and Encapsulating series. Ideal catalyst for deep section potting to obtain an even cure throughout.
QSil Matting Agent An additive to obtain a top matte surface finish on select silicone
elastomer products.
QSil PLE Increases the work life of most addition cure silicones, but will extend the final cure time.
QSil Primer #3 A one-component, blue tint general purpose primer for use with most silicone elastomers.
QSil Primer #3 Clear A clear one-part general purpose primer to acquire chemical adhesion to substrates including glass, aluminium, stainless steel and other silicones.
QSil Primer #3UV A one-component, general purpose primer, which contains a UV tracer
for ease of visual inspection.
QSil Primer #5 A one-part clear general purpose primer to acquire chemical adhesion and is designed for use with optically clear silicones. QSil Primer #5 can be used with addition cure and condensation cure silicones.
QSil Primer #6 A one-part clear general purpose primer to acquire chemical adhesion and is designed for use with optically clear silicones. QSil Primer #6 can be used with addition cure and condensation cure silicones.
QSil Primer #7 Provides a complementary interface for addition cure silicones and imparts strong adhesion to difficult substrates.
QSil Smooth Coat A two-component, low friction, translucent, sprayable, matte finish
for most silicone applications.
QSil STO For use with condensation cure silicones that can be added to standard catalysts to increase cure time.
Thixo Agent AC An additive for addition cure silicone elastomers that are silica filled
to create excellent thixotropic properties.